Watercraft Ramp Small Roller Wheel Kit
SKU:
Small Caster Wheel Complete Se
$219.00
$219.00
per item
The Build-It-Yourself Watercraft Ramp
Keep your watercraft high and dry with this simple and cost effective way to dock. Our kits are made to accommodate small boats, jet skis, or other PWC’s with a loaded weight from 1200lbs and 16 ft in length. Kit length can be extended if needed with the purchase of Extra Wheels which comes with the required mounting brackets, bracing, and fasteners.
Assembled Depth: 240 in
Assembled Width: 28 in
Assembled Height: 30 in
Product Weight: 40 lb
Includes: Instructions, 2500lb. Winch with 33 ft of nylon webbing Strap and Hook, Winch Post Supports, Bracings, Fasteners, and 12-rollers. Treated lumber is NOT included.
Rollers are non marking thermo plastic rubber with the proper hardness to protect the finish on your watercraft and provide ease of winching up onto the ramp.
All hardware brackets and fasteners are hot dipped galvanized for superior corrosion resistance.
PARTS LIST FOR SMALL MODEL (INCLUDED)
8 - Side Brace
24 - Roller Bracket (2/Roller)
1 - Winch Post Brace – Right
1 - Winch Post Brace – Left
1 - Winch
1 - 33 ft. (10 Meter) Galvanized Cable with Hook
12 - Rollers – Polyurethane
12 - Roller Spanner Bushing
12 - Stainless Steel Nylock Nut – 3/8”
12 - Stainless Steel Hex Bolt – 3/8” x 2 ½”
30 - Galvanized 3” Deck Screws
18 - Galv. Carriage Bolts – 3/8” x 2 ½”
24 - Galv. Hex Bolts – 3/8” x 2 ½”
3 - Galv. Hex Bolts – 3/8” x 4 ½”
1 - Galv. Carriage Bolt – ½” x 8” + Nut and Washer
45 - Galv. 3/8” Nuts
45 - Galv. 3/8” Split Washers
1 - Phillips Screwdriver Bit
SUGGESTED CUSTOMER SUPPLIED LUMBER
2 - Pressure Treated 2” x 6” x 16ft
6 - Pressure Treated 2” x 4” x 20-36ft
1 - Pressure Treated 4” x 4” x 8ft ***
***Customize if necessary
Keep your watercraft high and dry with this simple and cost effective way to dock. Our kits are made to accommodate small boats, jet skis, or other PWC’s with a loaded weight from 1200lbs and 16 ft in length. Kit length can be extended if needed with the purchase of Extra Wheels which comes with the required mounting brackets, bracing, and fasteners.
Assembled Depth: 240 in
Assembled Width: 28 in
Assembled Height: 30 in
Product Weight: 40 lb
Includes: Instructions, 2500lb. Winch with 33 ft of nylon webbing Strap and Hook, Winch Post Supports, Bracings, Fasteners, and 12-rollers. Treated lumber is NOT included.
Rollers are non marking thermo plastic rubber with the proper hardness to protect the finish on your watercraft and provide ease of winching up onto the ramp.
All hardware brackets and fasteners are hot dipped galvanized for superior corrosion resistance.
PARTS LIST FOR SMALL MODEL (INCLUDED)
8 - Side Brace
24 - Roller Bracket (2/Roller)
1 - Winch Post Brace – Right
1 - Winch Post Brace – Left
1 - Winch
1 - 33 ft. (10 Meter) Galvanized Cable with Hook
12 - Rollers – Polyurethane
12 - Roller Spanner Bushing
12 - Stainless Steel Nylock Nut – 3/8”
12 - Stainless Steel Hex Bolt – 3/8” x 2 ½”
30 - Galvanized 3” Deck Screws
18 - Galv. Carriage Bolts – 3/8” x 2 ½”
24 - Galv. Hex Bolts – 3/8” x 2 ½”
3 - Galv. Hex Bolts – 3/8” x 4 ½”
1 - Galv. Carriage Bolt – ½” x 8” + Nut and Washer
45 - Galv. 3/8” Nuts
45 - Galv. 3/8” Split Washers
1 - Phillips Screwdriver Bit
SUGGESTED CUSTOMER SUPPLIED LUMBER
2 - Pressure Treated 2” x 6” x 16ft
6 - Pressure Treated 2” x 4” x 20-36ft
1 - Pressure Treated 4” x 4” x 8ft ***
***Customize if necessary