Custom Install Parts
  • Store
  • About Us
  • General Policies
  • Contact
  • Store
  • >
  • Outdoor Accessories
  • >
  • Watercraft Ramp Large Roller Wheel Kit

Watercraft Ramp Large Roller Wheel Kit

SKU: Large Wobble Wheel Complete Se
$350.00
$350.00
Unavailable
per item
The Build-It-Yourself Watercraft Ramp

Keep your watercraft high and dry with this simple and cost effective way to dock. Our kits are made to accommodate boats, jet skis, or other PWC’s with a loaded weight from 1200-2000lbs and 16 ft in length. Kit length can be extended if needed with the purchase of Extra Wheels which comes with the required mounting brackets, bracing, and fasteners.

Assembled Depth: 192 in
Assembled Width: 28 in
Assembled Height: 30 in
Product Weight: 62 lb

Includes: Instructions, 2500lb Winch with 33 ft Strap and Hook, Winch Post Supports, Bracing, Fasteners and 16 Articulating Rollers.
​Treated lumber is NOT included.


Rollers adjust to the hull of your boat and are non-marking polyurethane with the proper hardness to protect the finish on your watercraft and provide ease of winching up on the ramp.

All hardware brackets and fasteners are hot dipped galvanized for superior corrosion resistance.


PARTS LIST FOR LARGE MODEL (INCLUDED)
12 - Side Brace
8 - Axle Bracket
8 - Axle
1 - Winch Post Brace – Right
1 - Winch Post Brace – Left
1 - Winch
1 - 33 ft (10 Meters) Galvanized Cable with Hook
16 - 4 Inch Wobble Rollers – Polyurethane 
8 - Stainless Steel Nylock Nut – 5/16”
8 - Stainless Steel Hex Bolt – 5/16” x 1 ½”
32 - Galvanized Flat Washer – ¾”
16 - Stainless Steel Cotter Pin – 1/8” x 1”
38 - Galv. 3” Deck Screws
32 - Galv. 1 ½” Screws
26 - Galv. Carriage Bolt – 3/8” x 2 ½”
3 - Galv. Hex Bolts – 3/8” x 4 ½”
1 - Galv. Carriage Bolt – ½” x 8” + Nut and Washers
29 - Galv. 3/8” Nuts
2 - Galv. 3/8” Flat Washers
29 - Galv. 3/8” Split Washers


SUGGESTED CUSTOMER SUPPLIED LUMBER:
2 - Pressure Treated 2” x 8” x 16 ft *
8 - Pressure Treated 2” x 6” x 24-42 ft *
1 - Pressure Treated 4” x 4” x 8 ft *
***Customize if necessary


Take a look at this short video of the fully built product! 
https://youtu.be/4eLktw0Geos


The Wave Runner shown in the video is a XLT 1200, weight is 900lbs. It is being lifted off of the lake about 3ft. using a 12 volt electric wench purchased at Harbor Frieght for about $60.00.
  • Facebook
  • Twitter
  • Pinterest
  • Google+
Add to Cart
© 2014 Custom Install Parts. All Rights Reserved. Lakeland, FL. Mail to: Custominstallparts@gmail.com  
Contact | Store | Home
Proudly powered by Weebly